This fully enclosed charger has microprocessor to oversee all charging functions. It has all the relevant functions, indications and alarms to give maximum life to the battery
Features
Wide input voltage range
Fully enclosed unit
Technical Specification
PARAMETER
SPECIFICATION
Input voltage range
170V to 270V AC, 50Hz
Output voltage
24V DC Nominal
Output current
20A max
Float voltage
27V±1%
Boost voltage
29V±1%
Output current limit
21.5A±0.5 A
Float to Boost change over
5A-6A
Output voltage regulation
±280mV
Ripple/Noise peak-peak
280mV without battery connected
Efficiency
≥75%
Switching frequency
100 KHz
Minimum load condition
No minimum load requirement for voltage regulation or operation of the Battery charger
Input / Output connector
PCB mounted terminal block
Operating temperature
0 to 50C
LED indications
Mains OK :Green
Float mode : Green
Battery reverse : Red
Over temperature
Protections
Fuse at the input 10A Fuse
Isolation of 1.5 KV between input & output
Output overload/ short circuit with autorestart
Protection against transient / surge at input through proper rated MOV
Over temperature protected, with auto restart
Input under voltage (150-165V) shutdown with auto restart
Input Over voltage(275V-300V)shutdown with auto restart
Battery reverse